China supplier Half Spacer Stable Performance Grid Coupling

Product Description

                                       Grid Flexible Coupling Shaft Coupling (JS)
JS grid coupling vibration, JS grid coupling and long service life. JS grid coupling under high load range, JS grid coupling starting safety, high transmission efficiency, reliable operation.
Feature:
1.The serpentine spring as the elastic element, the elastic strong at the same time, greatly improves the grid coupling torque, widely used in heavy machinery and general machinery.The serpentine spring special technology department, has long service life, allowing higher speed, has good ability to compensate in the axial, radial and angle
2.High transmission efficiency, start safety. Transmission efficiency of up to 99.47%, short-time overload capacity is 2 times the rated torque, operation safety.
3.Simple structure, convenient assembly and disassembly, long service life
4.Damping effect is good to avoid the resonance.

Model Tn KN.m (n) r/min d L L0 L2 D D1 t kg kg  
y x a
JS1 0.045 4500 18-22 47 97 66 95 3 1.91 0.571 0.15 ±0.3 0.076
JS2 0.14 4500 22-35 47 97 68 105 3 2.59 0.041 0.15 ±0.3 0.076
JS3 0.224 4500 25-42 50 103 70 115 3 3.36 0.054 0.15 ±0.3 0.076
JS4 0.4 4500 32-60 60 123 80 130 3 5.45 0.068 0.20 ±0.3 0.10
JS5 0.63 4350 40-56 63 129 92 150 3 7.26 0.086 0.20 ±0.3 0.127
JS6 0.90 4125 48-65 76 155 95 160 3 10.4 0.113 0.20 ±0.3 0.127
JS7 1.80 3600 55-80 89 181 116 190 3 17.7 0.172 0.20 ±0.3 0.15
JS8 3.15 3600 65-95 98 199 122 210 3 25.4 0.254 0.20 ±0.3 0.18
JS9 5.6 2440 75-110 120 245 155 250 5 42.2 0.426 0.25 ±0.5 0.20
JS10 8.0 2250 85-120 127 259 162 270 5 54.5 0.508 0.25 ±0.5 0.23
JS11 12.5 2571 90-140 149 304 192 310 6 81.3 0.735 0.28 ±0.6 0.25
JS12 18 1800 110-170 162 330 195 346 6 121 0.908 0.28 ±0.6 0.30
JS13 25 1650 120-200 184 374 201 384 6 178 1.135 0.28 ±0.6 0.33
JS14 35.5 1500 140-200 183 372 271 450 391 6 234 1.952 0.30 ±0.6 0.40
JS15 50 1350 160-240 198 402 279 500 431 6 317 2.815 0.30 ±0.6 0.45
JS16 63 1225 180-280 216 438 304 566 487 6 448 3.496 0.30 ±0.6 0.5
JS17 90 1100 200-300 239 484 322 630 555 6 620 3.76 0.38 ±0.6 0.56
JS18 125 1050 240-320 260 526 356 675 608 6 776 4.4 0.38 ±0.6 0.6
JS19 160 900 280-360 280 566 355 756 660 6 1058 5.63 0.38 ±1.3 0.68
JS20 224 820 300-380 305 623 432 845 751 13 1426 10.5 0.46 ±1.3 0.74
JS21 315 730 320-420 325 663 490 920 822 13 1787 16.1 0.46 ±1.3 0.8
JS22 400 680 340-450 345 703 546 1000 905 13 2269 24.1 0.48 ±1.3 0.89
JS23 500 630 360-480 368 749 648 1087 13 2951 33.8 0.48 ±1.3 0.96
JS24 630 580 400-460 401 815 698 1180 13 3836 50.2 0.5 ±1.3 1.07
JS25 800 540 420-500 432 877 762 1260 13 4686 67.2 0.5 ±1.3 1.77

Detailed Photos

Company Profile

HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

Our Services

1. Design Services
Our design team has experience in Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2. Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4. Research & Development
We usually research the new needs of the market and develop new models when there are new cars in the market.

5. Quality Control
Every step should be a particular test by Professional Staff according to the standard of ISO9001 and TS16949.

FAQ

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all customers with customized PDF or AI format artwork.

Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have an excellent price principle, when you make the bulk order the cost of the sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances. 

Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order? 
A: Sure, welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 

Contact Us

Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

Standard Or Nonstandard: Standard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Flexible
Customization:
Available

|

Customized Request

China supplier Half Spacer Stable Performance Grid Coupling
China supplier Half Spacer Stable Performance Grid Coupling

spacer coupling

What Are the Maintenance Requirements for Spacer Couplings?

Spacer couplings are relatively low-maintenance compared to some other types of couplings. However, regular inspections and preventive measures are essential to ensure their optimal performance and longevity. Here are the key maintenance requirements for spacer couplings:

1. Visual Inspections: Regularly inspect the spacer coupling and its components for signs of wear, damage, or misalignment. Look for any visible cracks, corrosion, or deformation.

2. Lubrication: Some spacer couplings may require periodic lubrication, especially if they have rolling elements such as bearings or if the coupling design necessitates lubrication. Follow the manufacturer’s guidelines for the appropriate lubrication intervals and type of lubricant to use.

3. Alignment Checks: Proper alignment between the connected shafts is crucial for spacer coupling performance. Periodically check and adjust the alignment to ensure that the coupling operates smoothly and efficiently. Misalignment can lead to premature wear and failure of the coupling.

4. Bolt Tightening: Check and tighten the coupling bolts regularly to maintain the desired clamping force. Loose bolts can cause vibrations and compromise the integrity of the coupling connection.

5. Environmental Considerations: In harsh or corrosive environments, pay close attention to the effects of the operating conditions on the coupling. Consider using corrosion-resistant materials or protective coatings to prolong the coupling’s life.

6. Replacement of Worn Components: If any components of the spacer coupling show signs of wear or damage beyond acceptable limits, replace them promptly. This includes components like the spacer, bolts, and locking devices.

7. Regular Maintenance Schedule: Develop a regular maintenance schedule based on the coupling manufacturer’s recommendations and the specific operating conditions of the machinery. A well-maintained coupling can significantly extend the life of the connected equipment.

8. Consult Manufacturer Guidelines: Always refer to the manufacturer’s maintenance guidelines and recommendations. They will provide specific instructions on maintenance intervals and procedures for the particular spacer coupling model.

By following these maintenance practices, you can ensure that the spacer coupling remains in optimal condition, reduces the risk of unexpected failures, and contributes to the overall reliability and efficiency of the machinery it connects.

spacer coupling

Impact of Spacer Couplings on the Overall Reliability of Connected Equipment

Spacer couplings play a critical role in enhancing the overall reliability and performance of connected equipment in power transmission systems. Here are the ways spacer couplings impact equipment reliability:

1. Misalignment Compensation: Spacer couplings can accommodate various types of misalignment, including angular, parallel, and axial misalignment. By allowing for flexible alignment between the connected shafts, spacer couplings help prevent undue stress and wear on the equipment components. This feature minimizes the risk of premature failures due to misalignment issues.

2. Vibration Damping: Spacer couplings act as shock absorbers, dampening vibrations and shocks generated during the operation of rotating machinery. By absorbing and dispersing these forces, spacer couplings reduce the transmission of vibrations to the connected equipment. This, in turn, reduces the risk of fatigue and vibration-induced failures, contributing to improved equipment reliability.

3. Overload Protection: In the event of sudden overload or torque spikes, spacer couplings can help protect the connected equipment from damage. The flexibility of spacer couplings allows them to absorb and dissipate excess torque or shock loads, preventing catastrophic failures in the system.

4. Reducing Wear and Tear: Spacer couplings minimize friction between shafts and mechanical components by allowing smooth and flexible movement. This reduces wear and tear on shafts, bearings, and other elements, leading to extended equipment life and enhanced reliability.

5. Enhanced Service Life: The ability of spacer couplings to compensate for misalignment and reduce vibration-related stress on connected equipment components results in extended service life for the machinery. By reducing the occurrence of breakdowns and the need for frequent repairs, spacer couplings contribute to overall system reliability.

6. Maintenance Simplification: Spacer couplings often require less maintenance compared to rigid couplings. Their ability to handle misalignment reduces the need for frequent realignment, and their design typically includes fewer moving parts, reducing the likelihood of maintenance-related issues. This simplification of maintenance procedures contributes to improved equipment reliability.

7. Contamination Prevention: Some spacer couplings are designed to protect against the ingress of contaminants such as dirt, dust, and moisture. By preventing the entry of harmful particles, spacer couplings help maintain the integrity of the connected equipment, reducing the risk of component damage and improving overall reliability.

8. Application-Specific Design: Spacer couplings are available in various designs and materials to suit specific applications and industries. Choosing the appropriate spacer coupling that meets the unique requirements of the application further enhances the overall reliability and performance of the connected equipment.

Overall, spacer couplings promote smooth power transmission, minimize stress and wear on equipment components, and protect against adverse operating conditions. By contributing to increased equipment reliability and service life, spacer couplings play a crucial role in the efficiency and longevity of rotating machinery and power transmission systems.

China supplier Half Spacer Stable Performance Grid Coupling  China supplier Half Spacer Stable Performance Grid Coupling
editor by CX 2023-10-17