Tag Archives: drive gear

China factory Flexible Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Coupling

Product Description

Flexible Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Coupling

Standard Or Nonstandard: Standard
Shaft Hole: 8-24
Torque: >80N.M
Bore Diameter: 19mm
Speed: 4000r/M
Structure: Flexible
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

China factory Flexible Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Coupling
China factory Flexible Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Coupling

spacer coupling

Can Spacer Couplings Be Used in Both Horizontal and Vertical Shaft Arrangements?

Yes, spacer couplings can be used in both horizontal and vertical shaft arrangements. The design of spacer couplings allows them to accommodate misalignment between shafts and transmit torque while maintaining a reliable connection. Here’s how they can be used in each configuration:

1. Horizontal Shaft Arrangements:

In horizontal shaft arrangements, the spacer coupling is installed between two shafts that are aligned on the same horizontal plane. The spacer coupling connects the two shaft ends and compensates for any radial, axial, or angular misalignment between them. This configuration is commonly used in various industrial applications, including conveyor systems, pumps, compressors, and fans.

2. Vertical Shaft Arrangements:

In vertical shaft arrangements, the spacer coupling is used to connect two shafts that are aligned on a vertical plane. This configuration is often found in applications where space is limited, and the mechanical equipment is stacked vertically. Spacer couplings in vertical arrangements can handle both the torque and the weight of the rotating components. The design should account for the additional force due to gravity acting on the connected equipment.

Advantages of Using Spacer Couplings:

– Spacer couplings provide flexibility and ease of installation in both horizontal and vertical shaft arrangements.

– They accommodate misalignment, reducing the risk of premature wear and increasing the lifespan of the connected equipment.

– Spacer couplings are available in various designs and materials, making them suitable for a wide range of applications.

– They allow for easy maintenance and replacement of components without the need to disassemble the entire system.

Note: When selecting a spacer coupling for a specific application, it is essential to consider factors such as torque requirements, operating conditions, and the level of misalignment expected in the system. Following the manufacturer’s guidelines for installation, maintenance, and usage is crucial to ensure the spacer coupling’s optimal performance and longevity in both horizontal and vertical shaft arrangements.

spacer coupling

How Does a Spacer Coupling Handle Angular, Parallel, and Axial Misalignment?

A spacer coupling is a type of flexible coupling that is designed to accommodate different types of misalignment between shafts. Here’s how it handles angular, parallel, and axial misalignment:

1. Angular Misalignment: Angular misalignment occurs when the axes of the two shafts are not parallel but intersect at a certain angle. A spacer coupling can handle angular misalignment by allowing the flexible element (such as an elastomeric or metallic component) to flex and bend when the shafts are not perfectly aligned. This bending action allows the coupling to compensate for the angular displacement between the shafts and transmit torque smoothly.

2. Parallel Misalignment: Parallel misalignment occurs when the axes of the two shafts are parallel but are offset laterally. A spacer coupling can handle parallel misalignment by virtue of its design. The spacer element (a cylindrical piece that connects the two coupling halves) provides the required lateral space between the shafts. This space allows the shafts to have a slight offset without inducing excessive stress on the machinery, thereby minimizing the risk of premature wear or failure.

3. Axial Misalignment: Axial misalignment occurs when the two shafts move closer together or farther apart along their axis. Some spacer couplings may have limited axial movement capabilities, which can help accommodate slight axial misalignment. However, it’s essential to ensure that the axial displacement is within the coupling’s specified limits to avoid overloading the coupling or the connected equipment.

Overall, spacer couplings are designed to be flexible and provide some degree of misalignment accommodation, but their ability to handle misalignment depends on their specific design and material properties. It’s essential to select the appropriate type and size of spacer coupling based on the expected misalignment and operational requirements of the machinery to ensure optimal performance and longevity of the coupling and the connected components.

China factory Flexible Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Coupling  China factory Flexible Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Coupling
editor by CX 2023-12-14

China wholesaler Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling

Product Description

Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric flexible gear Coupling

Application of Shaft Chain Coupling

A shaft chain coupling is a type of coupling that is used to connect 2 shafts that are not perfectly aligned. The coupling consists of a chain that is connected to 2 sprockets, 1 on each shaft. The chain allows the shafts to move slightly relative to each other, which helps to compensate for misalignment.

Shaft chain couplings are used in a wide variety of applications, including:

  • Conveyors: Shaft chain couplings are used in conveyors to transmit power from the motor to the conveyor belt.
  • Pumps: Shaft chain couplings are used in pumps to transmit power from the motor to the pump shaft.
  • Fans: Shaft chain couplings are used in fans to transmit power from the motor to the fan shaft.
  • Generators: Shaft chain couplings are used in generators to transmit power from the turbine to the generator rotor.
  • Wind turbines: Shaft chain couplings are used in wind turbines to transmit power from the turbine to the generator rotor.

Shaft chain couplings are a versatile and reliable type of coupling that can be used in a wide variety of applications. They offer a number of advantages over other types of couplings, including:

  • Can compensate for misalignment: Shaft chain couplings can compensate for misalignment up to 2 degrees. This makes them ideal for applications where the shafts are not perfectly aligned, such as when the equipment is installed in a new location or when the equipment is subject to vibration.
  • Easy to install: Shaft chain couplings are easy to install and maintain. They can be installed without special tools or training.
  • Available in a variety of sizes and styles: Shaft chain couplings are available in a variety of sizes and styles to meet the needs of different applications. This makes it easy to find a coupling that is the right size and style for your application.
  • Highly efficient: Shaft chain couplings are highly efficient, meaning that they transmit a large percentage of the power from the driving shaft to the driven shaft. This can save money on energy costs.
  • Durable: Shaft chain couplings are durable and can withstand a wide range of operating conditions.

Here are some of the disadvantages of using shaft chain couplings:

  • Cost: Shaft chain couplings can be more expensive than other types of couplings.
  • Maintenance: Shaft chain couplings require periodic maintenance, such as checking the coupling for wear and tear and lubricating the chain as needed.

Overall, shaft chain couplings are a versatile and reliable type of coupling that can be used in a wide variety of applications. They offer a number of advantages over other types of couplings, but they also have some disadvantages. The best type of coupling for a particular application will depend on the specific requirements of that application.

Standard Or Nonstandard: Standard
Shaft Hole: 8-24
Torque: >80N.M
Bore Diameter: 19mm
Speed: 4000r/M
Structure: Flexible
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

China wholesaler Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling
China wholesaler Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling

spacer coupling

Can Spacer Couplings Accommodate High Torque and High-Speed Applications?

Yes, spacer couplings are designed to accommodate both high torque and high-speed applications. These couplings are known for their ability to transmit torque efficiently between shafts and handle various operating conditions. The design and material selection of spacer couplings allow them to excel in demanding industrial settings. Here’s how they handle high torque and high-speed applications:

1. Torque Capacity: Spacer couplings are often constructed with robust materials such as steel or stainless steel, which provide high torque capacity. The coupling’s design and material properties allow it to transmit substantial amounts of torque without failure. In heavy-duty applications, where high torque is prevalent, spacer couplings are a preferred choice.

2. High-Speed Operation: Spacer couplings are also well-suited for high-speed applications. The design of the coupling ensures a secure connection between the shafts while maintaining balance during rotation. The coupling’s precise machining and balance prevent vibration and misalignment, allowing for smooth operation at high rotational speeds.

3. Torsional Stiffness: Spacer couplings have good torsional stiffness, meaning they resist twisting under torque. This characteristic is essential for high-speed applications, as it helps maintain accurate shaft synchronization and minimizes torsional vibrations.

4. Customization: Manufacturers offer various spacer coupling designs and sizes to cater to specific torque and speed requirements. Depending on the application’s demands, users can select spacer couplings with the appropriate torque and speed ratings.

5. Maintenance: Proper maintenance is essential for ensuring that spacer couplings continue to handle high torque and high-speed applications effectively. Regular inspections, lubrication, and alignment checks can help identify and address potential issues before they escalate into problems.

When choosing a spacer coupling for high torque and high-speed applications, it is crucial to consider factors like the application’s torque and speed requirements, environmental conditions, and the coupling’s material and design specifications. Proper selection and installation of the spacer coupling contribute to the reliable and efficient performance of the machinery.

spacer coupling

Factors to Consider When Choosing a Spacer Coupling for a Specific System

Choosing the right spacer coupling for a specific system requires careful consideration of various factors to ensure optimal performance and reliability. Here are the key factors to keep in mind:

1. Operating Conditions: Understand the operating conditions of the system where the spacer coupling will be used. Consider factors such as torque requirements, rotational speed, temperature range, and environmental conditions (e.g., corrosive, humid, or dusty environments).

2. Misalignment Compensation: Determine the type and magnitude of misalignment that the coupling needs to accommodate. Spacer couplings can handle angular, parallel, and axial misalignments to varying degrees, so selecting the appropriate coupling design is critical.

3. Shaft Sizes and Types: Ensure that the spacer coupling’s bore size matches the shaft diameters of the connected equipment. Additionally, consider whether the shafts are keyed, splined, or have other special features that may require customization of the coupling.

4. Coupling Material: The choice of material for the spacer coupling depends on the application’s requirements. Common materials include steel, stainless steel, aluminum, and various alloys. Consider factors such as strength, corrosion resistance, and temperature limits when selecting the material.

5. Torque and Speed Ratings: Determine the required torque and rotational speed ratings for the coupling based on the power transmission needs of the system. Select a coupling that can handle the specified torque and speed without exceeding its limits.

6. Spacer Length: The length of the spacer in the coupling affects the distance between connected equipment. Ensure that the chosen spacer length allows for proper clearance and alignment between the components.

7. Installation and Maintenance: Consider the ease of installation and maintenance requirements of the spacer coupling. Some couplings may require more frequent maintenance than others, which can impact overall system downtime.

8. Cost and Budget: Evaluate the cost of the spacer coupling and ensure that it fits within the project budget. While cost is a consideration, it is essential not to compromise on quality and performance for the sake of cost savings.

9. Industry Standards and Regulations: Ensure that the chosen spacer coupling complies with relevant industry standards and safety regulations. Adherence to these standards helps guarantee the coupling’s quality and suitability for the intended application.

10. Supplier and Support: Choose a reputable supplier with a track record of providing high-quality spacer couplings. A reliable supplier can offer technical support, assistance with selection, and post-purchase services if required.

By carefully considering these factors and evaluating the specific needs of the system, engineers and designers can select the most appropriate spacer coupling to ensure efficient power transmission, reduce wear on connected equipment, and enhance overall system performance and reliability.

China wholesaler Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling  China wholesaler Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling
editor by CX 2023-12-04

China wholesaler Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling

Product Description

Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric flexible gear Coupling

Application of Shaft Chain Coupling

A shaft chain coupling is a type of coupling that is used to connect 2 shafts that are not perfectly aligned. The coupling consists of a chain that is connected to 2 sprockets, 1 on each shaft. The chain allows the shafts to move slightly relative to each other, which helps to compensate for misalignment.

Shaft chain couplings are used in a wide variety of applications, including:

  • Conveyors: Shaft chain couplings are used in conveyors to transmit power from the motor to the conveyor belt.
  • Pumps: Shaft chain couplings are used in pumps to transmit power from the motor to the pump shaft.
  • Fans: Shaft chain couplings are used in fans to transmit power from the motor to the fan shaft.
  • Generators: Shaft chain couplings are used in generators to transmit power from the turbine to the generator rotor.
  • Wind turbines: Shaft chain couplings are used in wind turbines to transmit power from the turbine to the generator rotor.

Shaft chain couplings are a versatile and reliable type of coupling that can be used in a wide variety of applications. They offer a number of advantages over other types of couplings, including:

  • Can compensate for misalignment: Shaft chain couplings can compensate for misalignment up to 2 degrees. This makes them ideal for applications where the shafts are not perfectly aligned, such as when the equipment is installed in a new location or when the equipment is subject to vibration.
  • Easy to install: Shaft chain couplings are easy to install and maintain. They can be installed without special tools or training.
  • Available in a variety of sizes and styles: Shaft chain couplings are available in a variety of sizes and styles to meet the needs of different applications. This makes it easy to find a coupling that is the right size and style for your application.
  • Highly efficient: Shaft chain couplings are highly efficient, meaning that they transmit a large percentage of the power from the driving shaft to the driven shaft. This can save money on energy costs.
  • Durable: Shaft chain couplings are durable and can withstand a wide range of operating conditions.

Here are some of the disadvantages of using shaft chain couplings:

  • Cost: Shaft chain couplings can be more expensive than other types of couplings.
  • Maintenance: Shaft chain couplings require periodic maintenance, such as checking the coupling for wear and tear and lubricating the chain as needed.

Overall, shaft chain couplings are a versatile and reliable type of coupling that can be used in a wide variety of applications. They offer a number of advantages over other types of couplings, but they also have some disadvantages. The best type of coupling for a particular application will depend on the specific requirements of that application.

Standard Or Nonstandard: Standard
Shaft Hole: 8-24
Torque: >80N.M
Bore Diameter: 19mm
Speed: 4000r/M
Structure: Flexible
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

China wholesaler Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling
China wholesaler Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling

spacer coupling

Can Spacer Couplings Handle Misalignment Between Shafts?

Spacer couplings are designed to handle some degree of misalignment between shafts, but their capacity to do so depends on the specific coupling design and the magnitude of the misalignment.

Unlike flexible couplings, which can accommodate significant misalignment through their elastic properties, spacer couplings are generally less forgiving when it comes to misalignment. However, they can tolerate limited angular, parallel, and axial misalignment.

The amount of allowable misalignment for a spacer coupling depends on factors such as:

  • Coupling Design: Some spacer couplings, such as the sleeve or muff coupling, have relatively more flexibility and can handle more misalignment than others.
  • Coupling Size: Larger spacer couplings may have a higher misalignment capacity than smaller ones.
  • Material: Certain materials used in manufacturing spacer couplings may provide some level of flexibility to accommodate misalignment.
  • Application Requirements: The specific needs of the application, including the type of connected equipment and the expected operating conditions, will influence the acceptable misalignment range.

It is essential to consider the manufacturer’s specifications and recommendations when using spacer couplings to ensure that the misalignment falls within the permissible limits. Excessive misalignment can lead to premature wear, increased vibration, and reduced coupling life. Therefore, precise alignment during installation is critical for optimal performance and longevity of the spacer coupling and the connected machinery.

spacer coupling

Use of Spacer Couplings for Motor-to-Shaft and Shaft-to-Shaft Connections

Yes, spacer couplings can be used for both motor-to-shaft and shaft-to-shaft connections in various mechanical systems and power transmission applications. The versatility of spacer couplings allows them to accommodate different types of connections between rotating machinery and shafts.

1. Motor-to-Shaft Connections:

In motor-to-shaft connections, a motor is connected to a driven shaft or component. Spacer couplings can be utilized to bridge the gap between the motor and the driven shaft while maintaining the required alignment. These couplings help transmit torque from the motor to the driven shaft efficiently, ensuring smooth power transmission. They also compensate for any misalignment between the motor and the driven shaft, reducing the risk of mechanical stress and vibration-related issues.

2. Shaft-to-Shaft Connections:

For shaft-to-shaft connections, where two shafts need to be connected together, spacer couplings provide a flexible and reliable solution. Spacer couplings can handle angular, parallel, and axial misalignment between the shafts, allowing them to operate smoothly even when there are slight deviations in alignment. This capability helps prevent excessive wear and premature failure of equipment components.

Whether in motor-to-shaft or shaft-to-shaft connections, spacer couplings play a vital role in enhancing the reliability and efficiency of power transmission systems. They help protect connected equipment from shock loads, vibrations, and misalignment, ultimately contributing to extended service life and reduced maintenance requirements.

It is essential to select the appropriate type and size of spacer coupling based on the specific application requirements, including torque capacity, operating speed, shaft size, and environmental conditions. Proper installation and alignment of the spacer coupling are crucial to ensure optimal performance and reliability of the connected equipment.

China wholesaler Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling  China wholesaler Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling
editor by CX 2023-09-28

Foot made in China – replacement parts – in Guatemala City Guatemala Mounted Inline Star Wheel Drive Gear Decelerators with ce certificate top quality low price

Foot  made in China - replacement parts -  in Guatemala City Guatemala  Mounted Inline Star Wheel Drive Gear Decelerators with ce certificate top quality low price

Foot  made in China - replacement parts -  in Guatemala City Guatemala  Mounted Inline Star Wheel Drive Gear Decelerators with ce certificate top quality low price

We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing facility in China with 5 different branches. For more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Foot Mounted Inline EPT Wheel Travel Gear Decelerators

one.Quick Introduction of EPT Wheel Equipment Models:
A new era of star wheel push gearbox is a new interior gear transmission unit. Its innovative driving theory gained the Countrywide Creation Award and the patents of China, the United States, and Britain. EPT wheel drive gearbox is according to the requirements JB/T8713-1998 issued by Ministry of EPT Business, and can be broadly employed in metallurgy, mining, electrical, lifting, transportation, petrochemical, gentle business equipment and EPT equipment. Particularly in the area of weighty duty continuous transmission, EPT wheel drive gearbox demonstrates its exceptional efficiency. The inside gear push mechanism of star wheel drive gearbox has attained unitization, universalization and standardization, foremost to the wonderful enhancement of products dependability and carrying ability, thus star wheel push gearbox can fulfill distinct buyers demands in a bigger range.

2.Programs
EPT wheel push gearbox can be extensively employed in metallurgy, mining, electrical, lifting, transportation, petrochemical, mild business equipment and EPT equipment. Particularly in the discipline of hefty responsibility ongoing transmission, EPT wheel travel gearbox shows its superb performance.

three.Solution Qualities
(1) Large transmission performance.
(2) Compact structure, high carrying capacity.
(3) Clean transmission, minimal noise.
(4) Large ratio assortment, intensive pace ratio.
(5) Modular main models, effortless to keep.

4.Dimensions
Customization according to the software.

five.Aokman’s Providers:

Pre-sale services one. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling one.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
three.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

six.Our firm :
AOKMAN® was established in 1982, which has a lot more than 36 several years in R & D and production of gearboxes, gears, shaft, motor and spare parts.
We can offer you the proper answer for uncountable programs. Our merchandise are commonly utilized in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcoholic beverages industry and a variety of EPT sorts of equipment with a strong presence in the worldwide market place.
AOKMAN® has become a dependable supplier, capable to offer substantial quality gearboxes.With 36 a long time encounter, we assure you the utmo EPT trustworthiness and stability for equally merchandise and providers.

7.Customer going to:

eight.FAQ:
one.Q:What types of gearbox can you create for us?
A:Major items of our business: UDL collection speed variator,RV collection worm equipment reducer, ATA sequence shaft mounted gearbox, X,B series gear reducer,
P collection planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than a single hundred manner EPT and countless numbers of specifications
two.Q:Can you make as for every custom drawing?
A: Sure, we supply custom-made services for clients.
three.Q:What is your terms of payment ?
A: thirty% Progress payment by T/T right after signing the deal.70% prior to supply
four.Q:What is your MOQ?
A: 1 Set

If you are fascinated in our merchandise, welcome you contact me.
Our crew will assistance any want you might have.

The use of first products manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our company and the listed substitution areas contained herein are not sponsored, accredited, or manufactured by the OEM.

Foot  made in China - replacement parts -  in Guatemala City Guatemala  Mounted Inline Star Wheel Drive Gear Decelerators with ce certificate top quality low price

Foot  made in China - replacement parts -  in Guatemala City Guatemala  Mounted Inline Star Wheel Drive Gear Decelerators with ce certificate top quality low price

Foot  made in China - replacement parts -  in Guatemala City Guatemala  Mounted Inline Star Wheel Drive Gear Decelerators with ce certificate top quality low price